[GUIDE] : How to set automatic lock on iPhone and iPad?
By default, iPhone and iPad are automatically locked after one minute of inactivity. You can also change the lock time or turn off the automatic lock. This article will introduce you to the methods to turn auto lock on and off on iPhone and iPad, for auto lock failure, and for forgot unlock passcode.
How to set automatic lock on iPhone and iPad?
Auto-lock is a well-known feature on iOS devices. If you don’t use your iPhone or iPad for a while, the device’s screen is automatically locked. This helps keep your private data safe and saves battery life. At the same time, you can still check the received calls and messages. So how do you set auto lock on iPhone and iPad? Step 1: Open “Settings” on the main screen.
Step 2: Touch “Brightness and display”.
Step 3: Touch “Automatic locking”.
Step 4: Select the preferred duration, like 30 seconds, 1 minute, 2 minutes, 3 minutes, 4 minutes, 5 minutes or never.
Your device can then be locked automatically. If you want to deactivate the automatic locking, just select “Never”. Also on iPhone, there is a new feature. When you lift the iPhone, the screen is displayed. In case you don’t want this feature, just disable it by doing the following: Repeat the first two steps and go to the option “Brightness and display”. And then, turn off the option “Lift to activate”.
Under power saving mode, you cannot change the settings on auto lock. First of all, you need to check if the energy saving mode is activated. If the option “Automatic locking” is not turned on, your device is probably in power saving mode to save battery life. In fact, under power saving mode, the device is automatically locked after 30 seconds of inactivity. To deactivate this mode, just go to “Settings” and ” Drums “. Then turn off the power saving mode.
How to fix auto screen lock failure?
If the device cannot be locked after a certain period of inactivity, it means that the auto-lock feature has failed. You can repair it by following the methods below.
Method 1: Check if the option “Automatic locking” is activated and the “Automatic locking” is defined in never. If so, you can go to “Settings” and “Brightness and display”. And after, define “Automatic locking” in a certain time without ever.
Method 2: In case the automatic locking is configured correctly. You can restart your device and then check if the auto-lock is working normally.
Method 3: Change the idle time for automatic locking. For example, if you set auto-lock in 1 minute, you can change it in 30 seconds.
Method 4: Activate the code again. Touch “Settings” and « Touch ID et code » to deactivate the code. Then you restart the device and activate the code again.
Method 5: If you have enabled the accessibility touch which probably influences the automatic locking, please disable it.
How to do when I forgot my unlock code?
Forgot the unlock code on iPhone or iPad? Do not panic. Just use professional password reset software.
Renee iPassFix is a versatile and professional iOS system repair software. On the one hand, it can fix all kinds of iOS system issues like black screen, stuck on Apple logo, repeated restart, abnormal operation, etc. It can work on various Apple devices including iPhone, iPad, and iPod touch. On the other hand, Renee iPassFix is able to unlock the iOS device and remove the lock code.
Renee iPassFix – Professional software to fix iOS device errors
Delete password Clear the lock password even if the device does not start.
Fix iOS system errors iPhone and iPad get stuck in reset mode, DFU, restart, etc.
Reset to factory state Return the device to original state with one click in case the device does not start normally.
Operate under Any model of iPhone, iPad and iPod Touch.
Compatible with The latest versions of the iOS system.
DownloadDownloadAlready 1008 people have downloaded it!
Step 1: Download and install Renee iPassFix on your computer. And then, connect your iPhone or iPad to the computer via data cable. Select the function “Remove password”.
Step 2: Select the appropriate iOS version. And then, click on the button “Unlock” to automatically download the firmware or manually load the firmware.
Step 3: After clearing the lock code, disconnect the device from the computer. You restart the iPhone and perform the activation.
It is always recommended to enable auto lock on iPhone or iPad for the purpose of protecting personal data and saving battery life.
Change the iPhone screen auto-lock timeout
What could be more annoying than an iPhone that automatically goes to sleep while trying to follow a cooking recipe? Fortunately, there is an option to set the duration of inactivity before the iPhone screen automatically locks. We explain everything in this article.
Configure the sleep time for iPhone or iPad
Where do you put the cursor between safety and ease of use? The debate is not new and the answer is far from simple. But in a context marked by scandals relating to data theft, it is therefore better to secure your iPhone with a lock code.
So yes, it is binding on a daily basis. But your passwords, photos, contacts and all your confidential data will not be exposed in case of theft or loss. This will save you a lot of inconvenience such as hacking your bank accounts.
By default, iPhone’s mobile operating system automatically locks your phone screen after two minutes of inactivity. Obviously these criteria are not fixed. If it seems too short or on the contrary too long, don’t worry. You have the option of configuring the duration of the activation of the lock screen.
- Open iPhone Settings by clicking on the cogwheel icon
- Click on the Display and brightness section
- Press automatic lock
- Then select the desired time by checking the box of your choice: 30 seconds, 1 minute, 2 minutes, 3 minutes, 4 minutes, 5 minutes or never
Remember, the longer the standby time, the more your personal data may be exposed to the prying eyes of your friends and coworkers.
Obviously, it is totally inadvisable to opt for the never option. This is the least secure mode. Due to the amount of private data stored in your smartphone, it should only be used on very rare occasions.
Turn off your iPhone’s automatic screen lock
There are many cases where the iPhone screen auto-lock can be a hassle. This is the case, for example, when trying to follow a tutorial or a cooking recipe on the screen of your phone or tablet. Anyone who’s ever tried to unlock their phone with dirty or wet hands knows what I’m talking about.
To avoid this kind of situation, know that there is a trick to temporarily disable the automatic iPhone screen lock. This method uses the Guided Access feature well known to parents who want to limit the time a child spends on a phone.
- Open iPhone Settings
- Click on General then on Accessibility
- Press the Guided Access button located in the Learning section at the bottom of the screen
- Click on the switch to activate this function
- Then select the Code settings section to define a password to deactivate this feature.
- Check that the Apply Auto Lock button is greyed out
- Then return to the home page of your iPhone
- Launch the application of your choice
- Click the Home button three times
- Press the start button at the top right to launch the guided access mode
- Then enter the code to deactivate the guided access mode
As you can see, your iPhone screen is now stuck on a single app. Best of all, the lock screen will remain disabled for 20 minutes. This will give you plenty of time to consult a site or a notice without having to enter your PIN code every two minutes.
Then, to exit the guided access mode, all you have to do is press the home button three times, enter the deactivation code previously defined and then click on the end button at the top left. Note that on iPhone X and higher versions, in the absence of the Home button, you will have to press the side button three times and follow the operations described above.
How to prevent iPad screen from automatically locking?
It can be annoying, but the iPad screen automatically locks. To access it again, you must enter the tablet password.
The automatic locking is activated after a delay which is defined in the Settings then in the section: Automatic locking. Several options exist: 2 minutes, 5 minutes, 10 minutes and 15 minutes. By default Apple offers 2 minutes, which is short.
Adapt the delay to your needs and select: Never to deactivate this option. Note that some applications offer to disable this option, this is the case of magazine or book reading apps.
Too bad Apple does not offer a setting when the iPad is connected to a power supply like on OS X.